The kashyap anti-scale solution was installed to increase cooling tower and chiller efficiency.

Kashyap K25 was bundled with evaporative condenser system to ensure the long-term efficient operation of the system.

To solve the scaling problems of the Cooling tower and heat exchanger of compresser machine. After 6 months we noticed a lot of mineral scale had disappeared without cleaning or any other staff involvement.

Hard water mineral descaling technology was installed to improve efficiency and lower maintenance costs across the manufacturing facility's cooling tower, condensers, and heat exchangers (PHE).

The Kashyap solution against scale and rust was installed at Shilpa Medicare to remove mineral scaling. Before the devices were installed the company had to descale the HVAC Condenser tubes every 2 months. Since the installation the company only checks the condenser tubes once a year as part of their general maintenance.

The continuous casting machine (CCM) is subjected to 2,192°F (1,200°C) and a large amount of mineral scale would build-up in the equipment causing continuous production delays. Now that the Kashyap-250 model has been installed, the factory no longer experiences production loss or delays caused by having to manually remove excessive mineral scale deposits.

Impulse frequency hard water mineral descalers were installed to increase cooling towers and chillers efficiency while preventing mineral scale build up in the water piping system of the manufacturing facility.

The K-10 model was installed to help increase the efficiency of cooling towers and chillers while preventing mineral scale build-up in the water piping systems.

Heavy mineral scale formation has been observed inside chiller tubes requiring manual maintenance every 3 months to remove the scale deposits. After the Kashyap technology was installed on the equipment water pipes we no longer see scale buildup and our cleaning cycles have been reduced to an annual general cleaning and maintenance.

To remove existing scales and fight further scale deposition in a AHU Nozzles Before Kashyap mineral descalers were installed at the company's Textile Division; the Spinning Plant would have to deal with very high mineral scale content/ hardness level of 29 GPG (500 PPM). After the Kashyap installation when mineral hardness content would reach as high as 57 GPG (975 PPM) all piping, nozzles and AHU sheets woudl strill be clean and free of scale build-up.

Anti-scale mineral descalers were installed to remove clogging in cooling tower fills and intercooler compressors. After 45 days the observed scaling has been removed.

The Kashyap mineral descalers were installed to support the condenser equipment and eliminate the need for chemical treatment or pressure jet cleaning.

6 minerals mineral descaler were installed at Aculife Healthcare manuafctutring facilit, the world’s largest pharma manufacturing facility spanning 600+ acres; to increase the efficiency of the 4 cooling towers and chillers.

After the Kashyap descalers were installed for a few months; the scale in the cooling tower, tube heat exchanger and the pipes become soft allowing our maintenance staff to easily remove the scale with a finger.

Before using the Kashyap descaler the company used RO (Reverse Osmosis) water to control scale and rust in the cooling tower. After implementing the Kashyap device there is no scale build up and the temperature of the PHE and the condenser is stable.

Ultratech Cements replaced their anti-scaling chemical treatment with the eco-friendly, electronic impulse frequency mineral descaler. Since installing the K-750 device the company has stopped using anti-scaling chemicals and the efficiency of cooling towers and heat exchanger has increase. The mineral scale build-up in the piping system has also been avoided.